For deployed clusters, place each node into maintenance mode before changing the hardware. For undeployed nodes, install the cards as per the instructions.
- For information on installing a GPU and slot matrix of GPU on AX-750, see section Installing a GPU and Table: Configuration 2-1: R1A + R2A + R3B + R4A (FL) in Dell EMC PowerEdge R750.
- For GPU kit, see Dell EMC PowerEdge R750 Installation and Service Manual
- For information on installing a GPU and slot matrix of GPU on AX-7525, see section Installing a GPU and Table: Configuration 3-1. R1A+R2A+R3A+R4A (FL) in Dell EMC PowerEdge R7525.
- For information on installing a GPU and slot matrix of GPU on AX-650, see section Installing and removing system components Dell EMC PowerEdge R650.
- For GPU kit, see Dell EMC PowerEdge R7525 Installation and Service Manual
- Show installation of M10 GPU but is representative of all GPU cards. (Video)
Note: Remove the BOSS card power and data cables from Riser 1 before removing them. The power connection is fragile.