Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Azure Portal Deployment and Operations Guide with Switchless Networking
About using this guide Revision history Deployment Introduction Solution introduction Solution Deployment Deploy a cluster with Azure Stack HCI 23H2 operating system Update Azure Stack HCI clusters using SBE package GPU Integration
GPU Integration
Installing and configuring GPUs on AX platforms
AX-650 GPU configuration AX-750 GPU configuration AX-7525 GPU configuration GPU physical installation
GPU Discrete Device Assignment (DDA) on Azure Stack HCI
GPU partitioning
Host and guest driver download and install instructions
Registering a Partner Admin Link (PAL) for Azure related solutions Dell OpenManage Integration with Windows Admin Center Updates and maintenance References

Installing and configuring GPUs on AX platforms

Home > Integrated Products > Microsoft HCI Solutions from Dell Technologies > Guides 23H2 and later > Azure Portal Deployment and Operations Guide with Switchless Networking > Installing and configuring GPUs on AX platforms

Installing and configuring GPUs on AX platforms

  • AX-750 GPU configuration

    • AX-750 GPU ready server order includes:
      • Microsoft Azure Stack HCI operating system (version 23H2 required).
      • GPU enablement.
      • GPU ready configuration cable install kit R750.
      • Heatsink for two CPUs with GPU configuration.
      • Very high-performance Fan x6 or very high-performance Fan x6 with 30C max ambient temp.
      • Fan foam, HDD 2U.
      • Riser Config 2, full length, 4x16, 2x8 slots, DW GPU capable or Riser Config 2, half length, 4x16, 2x8 slots, SW GPU capable.
      • PSU configuration must be large enough to support additional GPU(s) power requirements
    • AX-750 GPU slot priority matrix:
      • Dual width GPUs in slot(s): 7,2
    Figure 29. Riser Config 2

    Riser Config 2