Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Azure Portal Deployment and Operations Guide with Switchless Networking
About using this guide Revision history Deployment Introduction Solution introduction Solution Deployment Deploy a cluster with Azure Stack HCI 23H2 operating system Update Azure Stack HCI clusters using SBE package GPU Integration
GPU Integration
Installing and configuring GPUs on AX platforms
AX-650 GPU configuration AX-750 GPU configuration AX-7525 GPU configuration GPU physical installation
GPU Discrete Device Assignment (DDA) on Azure Stack HCI
GPU partitioning
Host and guest driver download and install instructions
Registering a Partner Admin Link (PAL) for Azure related solutions Dell OpenManage Integration with Windows Admin Center Updates and maintenance References

Installing and configuring GPUs on AX platforms

Home > Integrated Products > Microsoft HCI Solutions from Dell Technologies > Guides 23H2 and later > Azure Portal Deployment and Operations Guide with Switchless Networking > Installing and configuring GPUs on AX platforms

Installing and configuring GPUs on AX platforms

  • AX-650 GPU configuration

    • AX-650 GPU ready servers must have the following:
      • Microsoft Azure Stack HCI operating system (version 23H2 required).
      • GPU ready configuration cable install kit.
      • Heatsink for two CPUs and GPU.
      • High performance Fans or very high performance Fans.
      • All-SSD, All-NVMe and Hybrid config Riser config support GPU.
      • PSU configuration must be large enough to support additional GPU(s) power requirements.

        Up to a max of two A2 GPUs per AX-650 are currently supported.