Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Azure Portal Deployment and Operations Guide with Switchless Networking
About using this guide Revision history Deployment Introduction Solution introduction Solution Deployment
Solution Deployment
Solution deployment introduction
Deployment prerequisites
Change operating system to iDRAC pass-through IPs Install Windows Admin Center Install OpenManage Integration with Microsoft Windows Admin Center
Predeployment configuration
Configuring network switches Configuring iDRAC and BIOS Configure Intel E810 NICs
Cabling instructions
Two-node, back-to-back connected architecture
Operating system deployment
Manual operating system deployment Factory-installed operating system deployment Configure host networking
Install roles and features
Configuration to prepare nodes
Change the hostname
Registry settings
Verifying and updating firmware and software compliance
Configuring firewall settings
Deploy a cluster with Azure Stack HCI 23H2 operating system Update Azure Stack HCI clusters using SBE package GPU Integration Registering a Partner Admin Link (PAL) for Azure related solutions Dell OpenManage Integration with Windows Admin Center Updates and maintenance References

Deployment prerequisites

Home > Integrated Products > Microsoft HCI Solutions from Dell Technologies > Guides 23H2 and later > Azure Portal Deployment and Operations Guide with Switchless Networking > Deployment prerequisites

Deployment prerequisites

  • Install OpenManage Integration with Microsoft Windows Admin Center

    1. Ensure you have Windows Admin Center.

    2. In WAC, go to Settings > Extensions.

    3. Under the Available extensions tab, select and install Dell OpenManage Integration. Once it is installed, you can access it on the left panel on the cluster manager, under Extensions.