Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
3-Tier Platform Design Guide
Introduction Solution design and key components Cisco UCS-managed compute layer Cisco Intersight-managed compute layer Network layer Storage layer Data protection and replication Management and virtualization
Management and virtualization
Introduction
Design principles Supported management solutions
Management components
Compute specifications Storage Bill of materials Network Logical network topologies
iSCSI shared storage design
Management tools
Windows Server Cisco Intersight Virtual Appliance Secure Connect Gateway
Virtualization
VMware vSphere Authentication
Cluster configurations
Patch management Data stores Virtual volumes vSphere Distributed Switch LAN traffic network configuration Virtual networks vSphere VLAN names and values
Compute VLAN examples
Management applications
Core applications Ecosystem applications
Managing multiple 3-Tier Platforms
Distributed management
Distributed management for storage Distributed management for virtualization
Solution configuration and specifications References

Distributed management

Home > Integrated Products > VxBlock 1000 and 3-Tier Platform Reference Architectures > Guides > 3-Tier Platform Design Guide > Distributed management

Distributed management

  • The following table shows the components and requirements for managing each distributed 3-Tier Platform:

    Table 115. 3-Tier Platform management component requirements
    Component Requirement
    Multisystem management and 3-Tier Platform networks High bandwidth, low error, and low latency L3 connectivity.
    Modern data centers A minimum of 10 GbE connectivity for high bandwidth and low latency.
    Subnets or VLANs There must be no subnet or VLAN overlap on the management solution or managed, distributed 3-Tier Platforms.
    Multisystem management and 3-Tier Platform network subnets Routable network subnets that use L3 to the respective networks.
    Multisystem management and components Enable VMware-supported IP address ports and protocol connectivity.
    Note: Configure firewalls for the management solution and 3-Tier Platform subnets and ports.