Home > Workload Solutions > SAP > Guides > SAP HANA HCI Guides > SAP HANA Deployments on Dell XC Family Systems Using Nutanix AOS and VMware vSphere > SAP HANA cluster configuration
The following table shows the cluster hardware configuration that we used for SAP certification of the solution:
Server model |
CPU |
Number of sockets |
Memory |
Disk |
Network |
Network bandwidth |
Switches |
1 x Dell EMC XC940-24 |
Intel® Xeon® (Gold) 6240 CPU @ 2.60 GHz |
4 x sockets with 18 cores each
|
48 x DIMMS of 64 GB each DDR4 – 3 TB |
8 x SAS SSDs 1.6 TB |
2 x Mellanox ConnectX-4 LX 25 GbE SFP Adapter Dual 25 Gb Ethernet |
25 GbE
|
2 x Dell EMC PowerSwitch S5248-ON |
1 x Dell EMC XC940-24 |
Intel® Xeon® (Gold) 6254 CPU @ 3.10 GHz |
4 x sockets with 18 cores each
|
48 DIMMS of 64 GB each DDR4 – 3 TB |
8 x SAS SSDs 1.6 TB |
2 x Mellanox ConnectX-4 LX 25 GbE SFP Adapter Dual 25 Gb Ethernet |
||
2 x Dell EMC XC740xd-24 |
Intel® Xeon® Gold 6248 CPU @ 2.50 GHz |
2 x sockets with 20 cores each |
12 x DIMMS 64 GB each DDR4 – 384 GB |
8 x SAS SSD 1.6 TB |
2 x Mellanox ConnectX-4 LX 25 GbE SFP Adapter Dual 25 Gb Ethernet |
Note: We used the configuration that is shown in the table for SAP HANA certification and validation. For more information, see Best practices and recommendations.