Home > Storage > PowerFlex > White Papers > Red Hat OpenShift 4.11 Deployment and Data Protection using PPDM on Dell PowerFlex 4.0 > OpenShift Ingress/API network configuration
Following is an OpenShift Ingress/API network configuration YAML file on one of the nodes. Copy and paste the following YAML file in the YAML editing box while configuring the static network using the Assisted Installer:
interfaces:
- name: eno1
description: Ethernet eno1
type: ethernet
state: up
ipv4:
enabled: false
mtu: 9000
- name: ens2f0
description: Ethernet ens2f0
type: ethernet
state: up
ipv4:
enabled: false
mtu: 9000
- name: bond0
description: Bond with ports eno1 and ens2f0
type: bond
state: up
ipv4:
enabled: false
link-aggregation:
mode: 802.3ad
options:
miimon: '100'
port:
- eno1
- ens2f0
mtu: 1500
- name: bond0.105
description: vlan105 using bond0
type: vlan
state: up
ipv4:
address:
- ip: 192.168.105.91
prefix-length: 24
enabled: true
vlan:
base-iface: bond0
id: 105
mtu: 1500
routes:
config:
- destination: 192.168.105.0/24
next-hop-address: 192.168.105.10
next-hop-interface: bond0.105
dns-resolver:
config:
search:
- rflex.com
server:
- 192.168.105.100
- 100.80.112.1