Home > Storage > PowerFlex > White Papers > Ransomware Protection:Secure data on Dell APEX Block Storage for Public Cloud with PowerProtect Cyber Recovery > Deploying the PowerProtect Cyber Recovery software on AWS
The following section describes how to deploy the Dell PowerProtect Cyber Recovery software on AWS using CloudFormation template.
Steps to install the Dell PowerProtect Cyber Recovery software using CloudFormation template:
Field | Description |
Prefix Configuration | All the names of the resources that are created by this template starts with a prefix. |
VPC Configuration | Enter the Classless Inter-Domain Routing (CIDR) range for creation of the AWS virtual private cloud (VPC). |
Subnets Configuration | Enter the CIDR range for the private subnet for the Cyber Recovery jump host. The jump host is deployed on this subnet. The subnet acts as the gateway between the production environment and the Cyber Recovery and DD subnet in AWS. Enter the CIDR range for the private subnet for the Cyber Recovery management host and DDVE. |
Key Pair Configuration | From the drop-down list, select a key pair from your AWS account to access: The jump host EC2 instance created in this stack. The Cyber Recovery management host EC2 instance created in this stack. The DDVE EC2 instance is created in this stack. |
Vault PowerProtect DD Configuration | From the drop-down list, select the DDVE model as m5.xlarge—up-to-16TB. From the drop-down list, select the number of DDVE metadata disks as Default. |
Production Network Information | Enter the CIDR range of the clients in the production deployment that require access to the jump host in the VPC. This value can also be a single IP address, that is, it uses a single netmask of /32. |