Home > Storage > PowerMax and VMAX > Storage Admin > iSCSI Implementation Guide for Dell EMC Storage Arrays Running PowerMaxOS > Create the Prod2 iSCSI configuration
The steps to create the Prod1 components are identical to the steps into create the Prod1 components. These steps will not be detailed in this section as they were earlier. The tool used to create the components in this section is the Unisphere iSCSI Configuration Wizard. Solutions Enabler commands will not be shown. For details on how to use the iSCSI Configuration Wizard and the associated Solutions commands to create IP Interfaces and iSCSI targets refer to the previous section “Implementing Example 1.”
Use the Unisphere iSCSI Configuration Wizard to create the Prod2 iSCSI target and IP interface using director 2F and SE port 28. Review the Prod2 component details as to what values to use. Complete the steps in the wizard, review the summary screen, and then click “Run Now.”