The following procedure describes configuring Dell PowerFlex SRA certificates for the Photon operating system if desired. This is not required if the user does not require certificate validation between the SRA container and the PowerFlex UI as the default configuration is set to not verify certificates.
Before adding the PowerFlex clusters in SRM, if the customer wants to enable certificate validation between sites, an additional configuration step is required. The root certificate of each PowerFlex cluster must be uploaded to its respective SRA. This certificate can be the same one used when replication was configured between the two PowerFlex clusters, or it can be extracted again. The following steps walk through the process. It must be completed for each SRA.