Home > Workload Solutions > Container Platforms > Red Hat OpenShift Container Platform > Archive > Implementation Guide—Red Hat OpenShift Container Platform 4.6 on Dell Infrastructure > Configuring the Dell switches
This section describes the Dell Networking OS10 initial out-of-band (OOB) management IP setup. Perform these steps to set an IP address to the management network. Modify the sample configuration files as needed and copy the modified switch config file to the switches as running-config.
To configure the switches:
OS# configure terminal
OS(config)# hostname S5232F-1
S5232F-1(config)# interface mgmt 1/1/1
S5232F-1(conf-if-ma-1/1/1)# no shutdown
S5232F-1(conf-if-ma-1/1/1)# no ip address dhcp
S5232F-1(conf-if-ma-1/1/1)# ip address 192.168.33.44/24
S5232F-1(conf-if-ma-1/1/1)# exit
S5232F-1(config)# management route 0.0.0.0/0 192.168.33.1