Home > Workload Solutions > Container Platforms > Red Hat OpenShift Container Platform > Guides > Design Guide—Red Hat OpenShift Container Platform 4.12 on Intel-powered Dell Infrastructure > Dell PowerEdge R660 BOM
The following table shows the PowerEdge R660 baseline configurations that are used in this design for OpenShift Container Platform 4.12:
Quantity | SKU | Description |
1 | [210-BEQQ] | PowerEdge R660 server |
1 | [379-BEID] | 10 x 2.5 front storage |
1 | [379-BDSW] | SAS/SATA/NVMe capable backplane |
1 | [321-BHRZ] | 2.5" chassis with up to 10 hard drives (SAS/SATA), 2CPU, PERC12 |
1 | [338-CHTD] | Intel® Xeon® Gold 6438Y+ 2G, 32C/64T, 16GT/s, 60M Cache, Turbo, HT (205W) DDR5-4800 |
1 | [338-CHTD], [379-BDCO] | Intel® Xeon® Gold 6438Y+ 2G, 32C/64T, 16GT/s, 60M Cache, Turbo, HT (205W) DDR5-4800 |
1 | [412-ABCG] | Heatsink for 2 CPU configuration (CPU more than or equal to 250W) |
1 | [370-AHCL] | 4800MT/s RDIMMs |
8 (for control-plane node) | [370-AGZO] | 16 GB RDIMM, 4800MT/s single rank |
12 (for data-plane node) | [370-AGZR] | 64 GB RDIMM, 4800MT/s dual rank |
1 | [405-ABDN], [750-ADWX] | PERC H965i with rear load bracket |
| [345-BEOZ] | 1.6 TB SSD SAS mixed use up to 24Gbps 512e 2.5in hot-plug 3WPD, AG drive |
2 (for data-plane node) | [400-BKGF] | 1.6 TB, Enterprise, NVMe, mixed use, U2, G4, P5600 with carrier |
1 | [450-AKLF] | Dual, hot-plug, power supply fault tolerant redundant (1+1), 1100W MM (100-240Vac) titanium, NAF |
1 | [528-CTID], [528-CTZH] | iDRAC9 data center 16G with OpenManage Enterprise Advanced Plus |
1 | [540-BDJL] | Nvidia ConnectX-6 Lx dual port 10/25GbE SFP28, OCP NIC 3.0 |
1 | [540-BDJO] | Nvidia ConnectX-6 Lx dual port 10/25GbE SFP28 Adapter, PCIe low profile |
1 | [406-BBTM] | Emulex LPe35002 dual port FC32 fibre channel HBA, PCIe low profile |
1 | [403-BCRZ], [470-AFMG] | BOSS-N1 controller card + with 2 M.2 960 GB (RAID 1) |