Home > Workload Solutions > Container Platforms > Red Hat OpenShift Container Platform > Archive > Design Guide—Red Hat OpenShift Container Platform 4.10 on Intel-powered Dell Infrastructure > Dell PowerEdge R750xa BOM
The following table shows the PowerEdge R750xa baseline configurations that are used in this design for OpenShift Container Platform 4.10:
Quantity | SKU | Description |
1 | [210-AYR K] | PowerEdge R750XA server |
1 | [379-BDTF] | Chassis with up to 8 x 2.5" drives |
1 | [321-BGKE] | 2.5" chassis with up to 8 SAS/SATA drives with up to 4 NVMe |
1 | [338-CBCJ] | Intel® Xeon® Gold 6338 2G, 32C/64T, 11.2GT/s, 48M Cache, Turbo, HT (205W) DDR4-3200 |
1 | [338-CBCJ], [379-BDCO] | Intel® Xeon® Gold 6338 2G, 32C/64T, 11.2GT/s, 48M Cache, Turbo, HT (205W) DDR4-3200 |
1 | [412-AAWO] | Heatsink for 2 CPU |
1 | [370-AEVR] | 3200MT/s RDIMMs |
16 | [370-AGDS] | 32 GB RDIMM, 3200MT/s, Dual Rank, 16Gb BASE x8 |
1 | [405-AAZB], [750-ACFQ] | Front PERC H755 Rear Load |
4 | [400-BDSU] | 1.92 TB SSD SATA Mixed Use 6Gbps 512e 2.5in Hot Plug S4610 Drive |
4 | [400-BLKD] | 1.6 TB, Enterprise, NVMe, Mixed Use, U2, G4, P5600 with carrier |
1 | [750-ADEP] | Very high performance fan |
1 | [450-AJEV] | Dual, Hot-Plug, Power Supply Fault Tolerant Redundant (1+1), 2400W, Mixed Mode |
1 | [528-CRVW], [528-CTZH] | iDRAC9 Datacenter 15G with OpenManage Enterprise Advance Plus |
1 | [540-BCOF] | Mellanox ConnectX-5 Dual Port 10/25 GbE SFP28, OCP NIC 3.0 |
1 | [540-BCMQ] | Mellanox ConnectX-5 Dual Port 10/25 GbE SFP28 Adapter, PCIe Low Profile |
1 | [406-BBMO] | Emulex LPE 35002 Dual Port 32 Gb Fibre Channel HBA, PCIe Low Profile |
2 | [490-BGJR] | NVIDIA ampere A100,40 GB, FH, GPU w/Brkt and NVLInk Bridge |
1 | [403-BCMB], [470-AERR] | BOSS-S2 controller card+ with 2 M.2 480GB (RAID 1) |
1 | [470-AEYS], [490-BGRQ], [490-BGRQ] | GPU factory installed cable kit for DW GPU W/CPU CONN + 3x NVLInk Bridge + 2 GPU Blanks (2 GPUs) |