Home > Storage > PowerFlex > White Papers > Deploying PostgreSQL on Dell PowerFlex > Test configuration of PowerFlex
The following table shows the hardware and software configuration of storage and compute nodes that are used in the on-premises setup that is used for Dell PowerFlex two-layer mode of deployment:
Table 2. Storage node configuration
Hardware | Configuration |
Server model | PowerFlex R750 |
CPU | 2 x Intel 6330 Xeon 28 Cores 3.1 GHz |
Memory (GiB) | 512 GB RAM with 2 x 16 GB NVDIMM |
NIC | 4 ports 25 GB Mellanox Connect-X 5 |
Storage | 12 x 1.6 TB SAS SSDs |
Software | Configuration |
Operating system | RHEL 8.6 |
Dell PowerFlex software release | 4.5.1 |
The following table shows the hardware and software configuration of the compute nodes on-premises setup that is used for a Dell PowerFlex two-layer mode of deployment:
Table 3. Compute node configuration
Hardware | Configuration |
Server model | PowerFlex R650 |
CPU | 2 x Intel 6330 Xeon 28 Cores |
Memory (GiB) | 256 GB |
NIC | 4 ports 25 GB Mellanox Connect-X 5 |
Storage | BOSS S1 Controller 2 x 240 GB SATA SSD |
Software | Configuration |
Operating system | RHEL 8.6 |
Dell PowerFlex software release | 4.5.1 |
PostgreSQL | 16.1 |