Home > Storage > PowerStore > Storage Admin > Dell PowerStore Manager Overview > Discovery with static IP address
If not using the recommended direct-connect method, you can discover PowerStore appliances running PowerStoreOS 1.0.3 and higher using a predefined static IP address. The user must set their workstation to an IP address in the 169.254.0.x/16 range which has access to the same network (untagged/native VLAN) that the PowerStore management ports are plugged into. After an IP on the workstation is set, the user can navigate using a browser to one of the predefined Static IP addresses below to start the Initial Configuration Wizard.
https://169.254.0.10
https://169.254.0.20
https://169.254.0.30
https://169.254.0.40
https://169.254.0.50
For more information about static IP discovery, see the documents PowerStore: Networking Guide and Dell PowerStore: Introduction to the Platform.