Home > Storage > PowerMax and VMAX > Storage Admin > Dell PowerMax and VMAX: Non-Disruptive and Minimally Disruptive Migration Best Practices and Operational Guide > PowerPath with Solaris
For Solaris with PowerPath, a cancel revert operation will end with the session in a “CancelFailed” state. The host paths to the source array running 5876 must be recovered using cfgadm.
For example, to recover the dead paths one by one:
cfgadm -c configure c5::50000973f001d109
cfgadm -c configure c5::50000973f001d105
cfgadm -c configure c4::50000973f001d109
cfgadm -c configure c4::50000973f001d105
To recover all paths on a controller:
cfgadm –c configure c4
cfgadm –c configure c5
Once the paths are online, the cancel revert can be resumed by performing an NDM recover operation.