This appendix provides an example walkthrough of the SRDF/Metro interface with Unisphere for VMAX 8.1. The following operations will be covered in the examples provided:
- Verifying SYMCLI and Discovery
- Source SID 174 RA Configuration
- Remote SID 248 RA Configuration
- Local and Remote RA Group Configuration
- Adding Witness SRDF Groups
- Listing SRDF/Metro Related SRDF Groups
- Creating Storage Groups and Standard Devices
- Display Source Storage Group and Devices
- Display Target Storage Group and Devices
- Creatpair with –rdf_metro and Storage Groups
- Query newly created SRDF/Metro Group
- Show First Source R1 Device, External Identity
- Show First Source R1 Device, RDF Information
- Show First Target R2 Device, External Identity
- Show First Target R2 Device, RDF Information
- Verifying Modes, Changing Bias in Active Mode
- Changing Bias on Suspend
- Deletepair Example
Figure 27. Verifying SYMCLI and Discovery
Figure 28. Source SID 174 RA configuration
Figure 29. Remote SID 248 RA configuration
Figure 30. Local & Remote RA group configuration
Figure 31. Adding Witness SRDF groups
Figure 32. Listing SRDF/Metro related SRDF groups
Figure 33. Creating storage groups and standard devices
Figure 34. Display source storage group and devices
Figure 35. Display target storage group and devices
Figure 36. Createpair with -rdf_metro and storage groups
Figure 37. Query newly created SRDF/Metro group
Figure 38. Show first source R1 device, external identity
Figure 39. Show first R1 device, RDF information.
Figure 40. Show first target R2 device, external identity
Figure 41. Show first target R2 device, RDF information
Figure 42. Verifying modes, changing bias in active mode
Figure 43. Changing bias on suspend
Figure 44. Deletepair example