Home > Storage > PowerFlex > White Papers > Dell PowerFlex File Replication using Datadobi StorageMAP > Start a replication
Figure 23. Replicate option
2. Click the New replication… button at the bottom right to open the Select source path window as shown in the following figure:
Figure 24. Create a new replication path
3. In Select source paths, select the source file server from the drop-down at the top as follows:
Figure 25. Select Source replication path
4. Select one or more target paths that need to be included in the replication as shown in the following figure. You can replicate at any level: The root or any level subdirectory.
Figure 26. Select Target replication path
5. Click Next. The Select target path dialog box is displayed.
6. Select the target file server or bucket and location.
7. Create additional directories to serve as the root level for the replication data.
After the required prechecks are done, the Job options screen is displayed. If there are any precheck failures, StorageMAP displays the issues found and, depending on the issue, offer to fix it by changing the file server’s configuration as shown in the following figure:
Figure 27. Sample replication path