Home > Storage > PowerScale (Isilon) > Product Documentation > Protocols > Dell Multipath Client Driver: Installation and Configuration Guide > NFS client logs
In addition to PCAPs, the following three client-side logs are another useful place to check when debugging a multipath driver issue:
Log file | Description |
/var/log/kern.log | Most client logging is written to this log file |
/var/log/auth.log | Authentication logging |
/var/log/messages | Error level message will appear here |
Verbose logging can be enabled on the Linux client with the following CLI syntax:
# sudo rpcdebug -m nfs -s all
Conversely, the following command will revert logging back to the default level:
# sudo rpcdebug -m nfs -c all