Dell EMC Networking SmartFabric Services Deployment with VxRail 4.7

• 1

  Purpose of this guide
• 2

  Dell Technologies
• 3

  VxRail
• 4

  SmartFabric Services
• 5

  SmartFabric Services with VxRail
• 6

  OpenManage Network Integration
• 7

  Typographical conventions

• 1

  Supported switches
• 2

  Hardware used in this guide

• 1

  Overview
• 2

  Production topology with SmartFabric Services
• 3

  Production topology connection details
• 4

  OOB management topology
• 5

  OOB management connection details

• 1

  Minimum requirements
• 2

  Unsupported environments
• 3

  Unsupported features
• 4

  Production topology deployment options
• 5

  Uplink options
• 6

  External switches
• 7

  VLANs and IP addresses
• 8

  VxRail network configuration table
• 9

  DNS server records
• 10

  SFS Spanning Tree Protocol support

• 1

  Cabling
• 2

  Configure leaf switch OOB management interfaces
• 3

  Enable SmartFabric
• 4

  Connect to the SmartFabric GUI
• 5

  Update fabric and switch names
• 6

  Configure L2 uplinks to the external network
• 7

  Configure L3 routed uplinks to the external network
• 8

  Configure a jump host port

• 1

  Initial VxRail cluster deployment steps
• 2

  Additional configuration steps for L3 uplinks
• 3

  Validate and build VxRail cluster

• 1

  Expand SmartFabric and VxRail cluster to multi-rack
• 2

  Verify preferred master setting before fabric expansion
• 3

  Configure management settings for new switches
• 4

  Add switches to SmartFabric
• 5

  Connect to the SmartFabric GUI
• 6

  Configure additional rack and switch names
• 7

  Configure leaf switch addresses for L3 uplinks
• 8

  Add a VxRail node to the cluster

• 1

  Deploy OMNI VM
• 2

  Configure OMNI
• 3

  Connect to OMNI in vCenter

• 1

  Connect a non-VxRail server to a leaf pair
• 2

  Add a new port group to the SmartFabric
• 3

  Move L3 uplinks to spine switches
• 4

  Upgrade SmartFabric OS10

• 1

  Validated Components
• 2

  General
• 3

  Dell EMC PowerSwitch systems
• 4

  VxRail P570 nodes
• 5

  VxRail E560 nodes
• 6

  VxRail appliance software
• 7

  OMNI software

• 1

  Additional Information
• 2

  Switch CLI validation commands
• 3

  Return to Full Switch mode
• 4

  Technical resources
• 5

  Fabric Design Center
• 6

  Feedback and technical support

• 1

  Cisco Nexus external switch configuration example
• 2

  Configure external Nexus switches for L3 routed connections
• 3

  Validated Nexus switches

• 1

  S5248F-1A-no-vlt
• 2

  S5248F-1A-vlt
• 3

  S5248F-1B-no-vlt
• 4

  S5248F-1B-vlt
• 5

  S5248F-single-switch