Switch configuration recommendations for network switches in Mellanox and Intel E810-based deployments
This document consists of switch configurations for all Mellanox and Intel E810-based deployments. The Azure Stack HCI Engineering team recommends that you use DCB (PFC/ETS) for all Mellanox and Intel E810-based deployments on switch ports that are used for RDMA traffic.
We have updated our guidance for all Mellanox and Intel E810-based deployments. If you have existing deployments that followed our earlier guidance, we recommend that you configure PFC/ETS for all RDMA ports.
|DCB (PFC/ETS) 1
|UDP RDMA (RoCE)