Home > Data Protection > PowerProtect DP Series Appliances > PowerProtect DP Series Appliance: VMware Workload Protection > Component setup
Appliance Configuration Manager deploys the DP Series Appliance and components. After you log in with root credentials, the DP4400 Configuration page shows the components to be configured.
Figure 4. DP4400 Configuration page
Mandatory components are:
Optional components are:
Contact your Dell Technologies representative for component licensing information.
Figure 5. Licensing Protection Storage (DDVE), Protection Software (AVE), Reporting and Analytics
Under General settings, the Network Setup section allows you to provide the IP range or specify the IP and subnet mask, and then validate the setting.
Figure 6. Network setting validation
In the Summary page, review the information that you entered and click Submit to start the configuration. A confirmation message is displayed.
Figure 7. Configuration summary
From the Configuration progress page, you can monitor the component deployment process.
Figure 8. Appliance configuration progress
Figure 9. Appliance Configuration Manager with components
After the appliance is successfully configured, you can download the Solution ID, configuration file, and configuration XML file for your reference.
For detailed configuration setup details, see the Dell EMC PowerProtect DP Series Appliance Installation and Upgrade Guide.