Home > Storage > PowerFlex > White Papers > Migration to Dell PowerFlex Volumes using PowerPath Migration Enabler > Migration from PowerMax volume to PowerFlex volume
The Volume was created in the PowerFlex system using the GUI. Volumes that are created on PowerMax are filled with data.
The following steps are performed to complete the migration.
Figure 5. Volume list
Figure 6. PowerMax volume with pseudo name
Figure 7. PowerFlex volume with PowerPath pseudo name volume
Figure 8. Setting up migration
Figure 9. Migration handle setup
Figure 10. Initiating Migration
Figure 11. Migration initiated
Figure 12. Migration in progress
Figure 13. Migration/Sync status completed with source selected
Figure 14. Selecting target volume for completing sync/migration
Figure 15. Target volume selected
Figure 16. Committing to target volume
Figure 17. Target volume committed
Figure 18. Pseudo name changed from source to target [emcpowera=emcpowed]
Figure 19. Pseudo name changed from source to target [emcpowerd=emcpowea]
Figure 20. Cleaning up handles