Home > Data Protection > PowerProtect DD Series Appliances > Dell PowerProtect DD Series Appliances and Commvault Integration Guide > Enabling basic NFS access on DD series appliances
Enable basic NFS access on DD series appliances as follows:
sysadmin@datadomain# nfs status
The NFS system is currently active and running.
Total number of NFS requests handled = 112.
NFS server version(s) 3:4 enabled.
sysadmin@datadomain#
The output in the following example shows that the access for the DD series appliance share /backup is open to all hosts (as shown with *):
sysadmin@datadomain# nfs show clients
Path Client Options
-------------- ------ --------------------------------------------
/data/col1/backup * sec=sys, rw, no_root_squash, no_all_
squash, secure, version=3)
----------------- ------ ------------------------------------------
sysadmin@datadomain# nfs add /data/col1/backup dh3-sit-79-43
NFS export for "/data/col1/backup" added.
Note: A * as a client name allows all servers access to the specified path on the DD series appliance.
Alternatively, at the DD System Manager (DDSM) Protocols > NFS page, you can perform major NFS operations such as enabling and disabling CIFS, setting authentication, managing shares, and viewing configuration and share information.