The show lldp table command is used to verify connections are connected to the correct devices. For example, the command output on Leaf1A shows the MAC address of each PowerFlex NIC connected to interfaces Eth1/1-1/15. The MAC shown in the command output can be cross-referenced with the MAC address that is shown in the PowerFlex node iDRAC during troubleshooting if necessary. Remote switch host names and ports are shown on interfaces Eth1/47-1/56 in this example.
Leaf1A# show lldp table
---------------------------------------------------------------------------
LocalPort RemoteDevice RemotePortID RemotePortDescr
---------------------------------------------------------------------------
Eth1/1 e8:eb:d3:29:88:f0 ConnectX-5,...
Eth1/2 e8:eb:d3:29:88:50 ConnectX-5,...
Eth1/3 e8:eb:d3:25:50:90 ConnectX-5,...
Eth1/4 e8:eb:d3:05:ef:64 ConnectX-5,...
Eth1/5 b8:3f:d2:b9:80:3b ConnectX-5,...
Eth1/6 b8:3f:d2:b9:80:3f ConnectX-5,...
Eth1/7 b8:3f:d2:b9:80:27 ConnectX-5,...
Eth1/8 b8:3f:d2:b9:7e:ab ConnectX-5,...
Eth1/9
e8:eb:d3:05:ec:b4 ConnectX-5,...
Eth1/10
10:70:fd:d4:12:8c ConnectX-5,...
Eth1/11
e8:eb:d3:06:31:cc ConnectX-5,...
Eth1/13
e8:eb:d3:8a:93:eb ConnectX-5,...
Eth1/14
e8:eb:d3:27:ea:a5 ConnectX-5,...
Eth1/15
e8:eb:d3:27:ea:ad ConnectX-5,...
Eth1/47 ExternalA Eth1/9 To Leaf1A port 1/47
Eth1/48 ExternalB Eth1/9 To Leaf1A port 1/48
Eth1/49 Leaf1B Eth1/49 Peer link to Leaf 1A
Eth1/50 Leaf1B Eth1/50 Peer link to Leaf 1A
Eth1/51 Leaf1B Eth1/51 Peer link to Leaf 1A
Eth1/52 Leaf1B Eth1/52 Peer link to Leaf 1A
Eth1/53 Spine1 Eth1/1 To Leaf 1A port 1/53
Eth1/54 Spine2 Eth1/1 To Leaf 1A port 1/54
Eth1/55 Spine3 Eth1/1 To Leaf 1A port 1/56
Eth1/56 Spine4 Eth1/1 To Leaf 1A port 1/56