- MC-LAGピア リンクで使用するLACPポート チャネルを作成します。 注: Dell Technologies Enterprise SONiCに作成されたポート チャネルは、デフォルトでLACPを使用します。
- 説明を入力します。
- スイッチ上のすべてのVLANをMC-LAGポート チャネルに割り当てます。 マルチラック導入の場合は、VRF VLAN(この例では2001)を含めます。
- LACP
fast_rate
オプションを有効にして、障害検出に必要な時間を最小限に抑えます。 - 最適なパフォーマンスを得るために、MTUサイズを9216バイトに設定します。
- インタフェースを有効にします。
- 「mclag domain domain-id」コマンドを使用してMC-LAGドメインを作成します。 注: 有効なMC-LAGドメイン番号は1~4095です。スイッチでサポートされるドメインは1個だけです。
- ソースIPの場合は、ローカル スイッチのルーターIDを指定します。
- ピアIPの場合は、ピア リーフ スイッチのルーターIDを指定します。
- MC-LAGピア リンクとして使用するポート チャネルを指定します。
- このリーフ ペアーに固有のMC-LAGシステムMACを割り当てます。 両方のリーフ スイッチで同じMACを使用します。
リーフ1A リーフ1B interface PortChannel 100
description "MC-LAG peer link"
switchport trunk allowed Vlan 103-106,140-143,150-152,161-162,2001
fast_rate
mtu 9216
no shutdown
!
mclag domain 1
source-ip 10.1.1.1
peer-ip 10.1.1.2
peer-link PortChannel100
mclag-system-mac 00:00:00:00:00:01interface PortChannel 100
description "MC-LAG peer link"
switchport trunk allowed Vlan 103-106,140-143,150-152,161-162,2001
fast_rate
mtu 9216
no shutdown
!
mclag domain 1
source-ip 10.1.1.2
peer-ip 10.1.1.1
peer-link PortChannel100
mclag-system-mac 00:00:00:00:00:01