The Overcloud hardware configurations and the settings for the Intelligent Platform Management Interface (IPMI) are done through Ironic which is included in the JetPack automation toolkit.
Configuring server network settings
Set the iDRAC IP address source:
- If the Overcloud nodes were ordered with the iDRACs configured for DHCP, or are currently configured for DHCP, then no further configuration is necessary.
- If you wish to use static IP addresses, then configure the Overcloud nodes' DRAC IP address, subnet mask, default gateway IP, and default VLAN (ID = 110, if required) using the iDRAC GUI.