Register the Dell Telecom Infrastructure Automation Suite product
Configure connectivity services
Follow these steps to configure the connectivity services parameters that are required to register Dell Telecom Infrastructure Automation Suite with the Dell back end.
Ensure that the Service Connectivity Gateway (SCG) is properly configured, accessible, and in an operational state.
Note: If the SCG is not configured or in an operational state, contact Dell Professional Services.
In the Home page, from the left-side menu, select Settings, and then select Connectivity Service.
From the Configure Connectivity Services section, click Configure.
The DTIAS Registration with Dell Technologies Connectivity Services window opens.
Click Secure Connection Gateway (SCG).
The Secure Connection Gateway (SCG) window displays.
Enter the required information. Fields with a red asterisk are required.
Table 18. SCG details settings
Field Name
Description
Primary Gateway IP: Port (required)
Enter a primary gateway IP address and port number.
Gateway Priority (required)
Set a gateway priority. You can enter a number or click the up or down arrow that appears when you hover over the field. For example, set the priority to one for a primary gateway.
Secondary Gateway IP: Port (optional)
Enter a secondary gateway IP address and port number. This setting represents a failover SCG in case the primary SCG fails.
Gateway Priority (optional)
Set a secondary gateway priority.
Click Test to test the connection, or click Save.
The system returns to the DTIAS Registration with Dell Technologies Connectivity Services window.