show mclag briefコマンドは、MC-LAGドメインのステータスを表示します。1台のスイッチの役割はアクティブに設定され、もう1台のスイッチはスタンバイに設定されています。セッション ステータスとピア リンク ステータスの両方がアップしている必要があります。MclagシステムMacは、ペアーの両方のリーフ スイッチで同じである必要があります。リーフスパイン ファブリック内の他のすべてのリーフ ペアーおよびデバイスとは異なる必要があります。
PowerFlexノード, PowerFlex node導入前に、PowerFlexポート チャネルのMC-LAGインターフェイスのステータスが、ダウン/アップまたはアップ/ダウンと表示されます。PowerFlexノード, PowerFlex nodesの導入後、接続されているポート チャネルのステータスがアップ/アップに変わります。
Leaf1A# show mclag brief
Domain ID : 1
Role : active
Session Status : up
Peer Link Status : up
Source Address : 10.1.1.1
Peer Address : 10.1.1.2
Peer Link : PortChannel100
Keepalive Interval : 1 secs
Session Timeout : 30 secs
Delay Restore : 300 secs
System Mac : b0:4f:13:2b:6a:a2
Mclag System Mac : 00:00:00:00:00:01
Number of MLAG Interfaces:14
-----------------------------------------------------------
MLAG Interface Local/Remote Status
-----------------------------------------------------------
PortChannel1 down/up
PortChannel2 down/up
(output truncated)