The configuration commands for the examples in this guide assume that the switches start at their factory default settings, with the default login ID (admin) and password (admin). The commands below are used to reset the Dell switches in this guide to factory defaults.
Note: For switches such as the Dell PowerSwitch S4148F-ON that support port profiles, resetting to factory defaults also resets the switch to the default port profile. For more information about port profiles, see the
SmartFabric OS10 User Guide.
To reset SmartFabric OS10 switches back to the factory default configuration, perform the following steps:
- Delete the startup-configuration file and reload the switch using the following commands:
OS10#delete startup-configuration
Proceed to delete startup-configuration [yes/no(default)]:yes
OS10#reload
System configuration has been modified. Save? [yes/no]:no
Proceed to reboot the system? [confirm yes/no]:yes
The switch reboots with default configuration settings.
- To configure the switches, log in using the default username (admin) and password (admin).