Switch configuration recommendations for network switches in iWARP-based deployments
This document consists of switch configurations for all Internet Wide-area RDMA Protocol (iWARP) based deployments. The Azure Stack HCI Engineering team recommends that you use Pause Flow for all iWARP-based deployments on switch ports that are used for RDMA & Management/VM traffic.
Topology | Converged | Non-converged |
Flow Control | Pause Flow | Pause Flow |
TCP RDMA (iWARP) | QLogic 41262 (25 GbE) | QLogic 41262 (25 GbE) |